Adding a remote to a room’s lighting system is an effective way to add convenience to your house. It also means that you can rearrange your furniture without worrying about blocking a light switch. A remote receiver can be wired into almost any existing light switch. However, wiring is a precise and delicate job. Follow these steps so as to add a remote receiver to your hardwired light switch.
Things You will Need
Phillips head screwdriver
Red covered wire
Black covered wire
Flip your circuit breaker in order that no power is supplied to the switch you want to replace. Modern circuit breakers are clearly labeled as to which switch provides power to which room, but among the older ones are not labeled. In case your circuit breaker shouldn’t be properly labeled, flip the primary switch to chop power to your entire house.
Unscrew the light switch panel from the wall. Place the screws safely to the side, since you will want to revive them later.
Pull the light switch panel gently from the wall. Pull the wires out gently and stop when you’re feeling resistance. Don’t pull too hard or you might disconnect the wires’ other end.
Unscrew the wires from the back of your light switch panel using your flathead screwdriver.
Attach the exposed metal portion of every wire to the same color wire on the top of your remote receiver; twist the wires together to attach them. Twist one end of your extra black covered wire onto the black wire connection. Twist one end of your extra red covered wire onto the red wire connection.
Cap each reference to a wire nut. Wrap any remaining exposed metal wire in electrical tape.
Screw the other end of each extra wire connection to the back of your light switch panel. Slide the remote receiver into the wall through the outlet where you pulled out the wires. Slide the surplus wire back into the wall as well.
Other People are Reading
Find out how to Wire Downlights Right into a Lighting Circuit
How to Wire a Five-Way Light Switch
Screw the light switch panel back into the wall. Restore power through your circuit breaker and test your remote light switch.
Home Tips: Find out how to Replace An ordinary Light Switch
Home Lighting Design: How Can a Remote Control Light Switch Save Money and Increase Convenience
Promoted By Zergnet