Hold learning button and learning indicator light blinks, then press a buttons of remote control, if indicator lights flashes 3 times, match code successfully. Maximum 20 remote controls can be matched.
2. Delete code:
Hold learning button till the indicator LED lights and then off, delete successfully.
3. Set working mode:
S1 & S2 program the sequence as follows:
Jumper on S1Toggle
Jumper on S2Latching
No Jumper on S1 &S2Momentary
AC 220V 1-Ch Remote Control Switch KL-K110X
1. Momentary: Press remote button A, the corresponding relay on the receiver is on; release button A, the relay is off, the same as others.
2. Toggle: Press remote button A, the corresponding relay on the receiver is on; press button A again, the relay is off, the identical as others.
3. Latching: Press remote button A, the relay A is on, B is off; press button B, the replay B is on, A is off.